What precautions should novice Xiaobai pay attention to when using UV printers

1. Before preparing to print, we need to check if there are any foreign objects on the platform of the UV printer, especially small things such as screws and small tools. We must also clean the dust on the surface of the platform to prevent it from adhering to the surface of the nozzle.

2. Before printing with a UV printer, do not forget to adjust and check the printing height of the nozzle. The optimal distance between the front of the vehicle and the printing material is 2mm, which can ensure printing accuracy. If the distance is not adjusted properly, it is easy to cause poor printing results and even scratch the product, damaging the nozzle.

3. The position of the UV printer should not be directly exposed to sunlight, and should be placed away from sunlight.

4. The optimal operating temperature and humidity for UV printers are 20-28 degrees Celsius and 50% -60% relative humidity.

5. We must use high-quality ink for UV printers. Generally, using UV printer manufacturers is a good choice, as there are many low-quality inks that are cheap, but their corrosiveness or fineness may be poor, which can easily cause damage to our nozzles.

6. If the UV printer does not print for a long time, remember to clean the ink inside the nozzle and use the nozzle's moisturizing solution to protect the nozzle. This can prevent the ink inside the nozzle from drying out, and also prevent dust from entering and blocking the nozzle.

7. The UV printer is connected to a ground wire and equipped with a voltage regulator to prevent voltage instability from causing the board or nozzle to burn out.